Browse by Date

A01.P1 - Advances in Focused Ion Beam Instrumentation, Applications, and Techniques for Materials and Life Sciences

(1) Multi-Ion Plasma FIB for Advanced TEM Lamella Preparation: A Comparative Study Toward (SE)EBIC-Enabled Analysis

(2) Cryogenic Focused Ion Beam Preparation of Organic-Inorganic Hybrid Perovskite FAPbI3 for Transmission Electron Microscopy

(4) Effects of Sample Size and Geometry on Phase Transformation of Nanograined NiTi Micropillars

(5) Exploring Three-Dimensional Cathodoluminescence Technique with FIB-SEM

(6) Regressive Prediction of Focused Ion Beam Milling Depth for Electron Diffraction Gratings

(7) Site-Specific Sectioning and SEM Imaging of MOSFET Active Regions for Device Failure Analysis

A02.P1 - Frontiers of Electron Ptychography

(12) Cancelled - Investigating the Effect of Update Strengths for Atomic-Resolution Low-Dose Imaging in Iterative Ptychography

(14) Searching for Nitrogen-Vacancy Centers in Diamond with Multislice Electron Ptychography

(11) Imaging Hydrogen, its 3D Inhomogeneity and Strain Mapping of Palladium Hydride (PdH) Nanoparticle by Ptychography

(10) Cancelled - Decoding Moiré Patterns of Small, Embedded SiC Nanoparticles in Si with Multislice Electron Ptychography

(9) Aberration Measurement by Electron Ptychography and Consistency Among Different Algorithms

(13) Non-Iterative Electron Ptychography With Relaxed Real-Space Sampling

(8) A Deep Learning Framework for Accelerated Electron Ptychography with Balanced Accuracy and Efficiency

A03.P1 - When 4D-STEM Meets More Dimensions: Deepening Materials Insights with Efficient Experimental Design and Smart Computational Microscopy

(354) Classification of Silicate-Filled Vesicles in Pyrrhotite grains from Asteroid Ryugu via 4DSTEM

(355) Fast ‘Frame Based’ Precession Mapping Technique for Multimodal STEM Applications

(356) In-Situ 4D STEM: Capturing 5D Insights into Material Dynamics in Liquid

(357) Scanning Convergent Angle Rocking Electron Diffraction (SCARED) for Expanding Real and Reciprocal Space Information

(358) 4D-STEM Analysis of Fe-Sulfides from the Early Solar System

(359) 4D-STEM Investigation of Point Defects in Off-Stoichiometric SrTiO₃ for Memristive Switching Applications

(360) Advancing 4D STEM using Computational Techniques

(361) Autonomous Acquisition of 4D-STEM Data to Dynamically-Sample Hidden Material Heterogeneities using Live Quantitative Analysis

(362) Chromatic Aberration Considering for Optimum Bright Field Imaging using 4D STEM Data

(363) Deciphering Growth Kinetics of a Topological Insulator using in-situ 4D-STEM

(364) Deep Learning-embedded 4D-STEM CBED Approach for Mapping Polymorphic Phase Distribution of Doped Hafnia Thin Films

(365) Hamiltonian-Preserving Symplectic Neural Networks for Robust Phase Retrieval in 4D STEM Ptychography

(366) Multimodal STEM Analysis of Aluminum Alloy with Multiscale Precipitates

(367) Optimizing 4D STEM Data Collection and Processing for Crystal Orientation Mapping Analysis in DigitalMicrograph

(368) Unraveling Nanodiffraction Patterns of Metal Halide Perovskite Nanowires Inside Carbon Nanotubes

(368.5) 5DSTEM: Merging 4DSTEM and Core-Loss EELS: A Path to Detect Parameter-Free Electron Energy-Loss Magnetic Chiral Dichroism with Prospects of Atomic Resolution

A04.P1 - Contributions of Analytical Electron Microscopy to Understanding Microstructural Evolution in Materials: James Bentley Memorial Symposium

(108) BUGEM: Fast and Robust Algorithm for Extracting EndMembers in STEM Spectrum-Image

(112) In-situ spectroscopy and post-corrosion electron microscopy study of pure Vanadium in LiCl-KCl-EuCl3 molten chloride salt

(114) Microstructural Analysis of BaTiO₃: Influence of the Barium Precursor and HCl Treatment

(107) Advanced STEM Analysis of Anion Void Lattice and Defects Evolution in Electron Irradiated CaF

(110) Effect on Microstructure and Microhardness of MgO (24%)-Stabilized Zirconia Coatings Produced by Atmospheric Plasma-Spraying and Laser Cladding

(105) Microstructural Characterization of Nb-Added Maraging 18Ni Steel

(106) Synthesis and Early Stage Sintering of Ultrafine HEA Nanoparticles

(116) Morphological Characterization of Chemically Cross-linked Carboxymethylcellulose Hydrogel Incorporating Doxycycline for Drug Release

(117) Quantitative Study of Electron Beam Damage in Metal Halide Perovskites using Nanobeam Diffraction

(109) Eco-Friendly Synthesis of ZnO Nanoparticles via Purple Corn Extract: Microstructural Analysis and Antibacterial Potential Against RAM Bacteria

(115) Microstructural Characterization and Antibacterial Study of Ag Nanoparticles Synthesized by Aqueous Extract of Jatropha dioica

(113) Microscopic Insights into the Role of High-Valence Elements in Stabilizing Nickel-Based Cathodes for High-Energy Batteries

(111) Ex-situ Heat Treatment of TEM Foils in a Custom Titanium Fixture: A Case Study on Ni-based Superalloy

A05.P1 - Latest Advances in Atom Probe Tomography

(122) Enhancing Cluster Identification in Atom Probe Tomography Data Using a Density-Based Framework

(121) Complementary 3D STEM-EELS and APT Analysis for Chemical Composition Analysis of DRAM Contact Area

(123) Local Calibration of APT Data Scaling for Diffusion Calculations

(125) The Hydrogen Trapping potential of Cr-rich M23C 6 and M7C 3 Carbides in Hybrid steel alloys investigated by Atom Probe Tomography

(119) Analysis of Commercial Semiconductor Devices with Atom Probe Tomography

(124) Study on the Effect of Oxygen in Fe-Ti Hydrogen Storage Alloy with Phase and Microstructure Analysis

(118) A Nanoscale Investigation of Plasma Electrolytic Oxidation Coatings on Mg Alloy: The Role of Electrolyte

(120) Atom Probe Analysis for Hydrogen Catalyst Materials

A06.P1 - Surface and Subsurface Microscopy and Microanalysis of Physical and Biological Specimens

(24) Lateral-Force AFM Study of Graphene Thickness Effects for Reduced Steel Friction

(31) Ultra-High-Speed Rotor for Improved Characterization of Microparticle-Surface Adhesion

(32) Which Instrument Should You Use for High Lateral Resolution Chemical Analysis - SEM/EDS or ToF-SIMS?

(16) Microscopy Analysis of Wear Mechanisms of Reinforced Composites Materials

(20) Effects of Heat Treatment on the Microstructural Morphology of Additively Manufactured 316L Stainless Steel

(29) Surface Characterization on Agricultural grade steel with Boriding Treatment

(25) Microscale pore analysis using broad beam ion milling of free surfaces

(27) Observation of Magnetosome Structures Isolated from Magnetotactic Bacterium Solidesulfovibrio magneticus RS-1

(15) Characterization of ALD-Grown Al2O3Thin Films Transferred from Sacrificial Polymer Substrates

(26) Microscopic and Elemental Characterization of Biosubstrates for Application in Biosensor

(22) High-Speed Atomic Force Microscopy Revealed Dynamic Polymerization of MamK Cytoskeleton for Magnetosome Positioning

(21) High Resolution STM Images Achieved Using an Open-Source Microcontroller-Enabled Tungsten Tip Etching System

(18) Cancelled - Characterization of Pyrotechnic Mixtures using High Resolution Scanning Electron Microscopy (SEM) and X-Ray Fluorescence

(17) Characterization of Ag dendrites deposited on Al surfaces by electrodeposition process

(23) Investigation of structural and thermal properties of Nb2CTX MXenes at elevated temperature

(28) Selective Surface Processing on Cutting Tool

(30) Texturing Copper Powder via Annealing for Increased Optical Absorbance

(19) Effect of Hot Extrusion on a Li-modified A356 Al alloy

A07.P1 - Advances in SEM Instrumentation, Application and Techniques

(219) A novel method for reducing charging in SEM by simultaneous irradiation with an electron beam and VUV light

(220) Advancing Nanoscale Material Dynamics: Bridging In-Situ Liquid Phase SEM and TEM

(221) Morphological Analysis of Graphene Oxide by Scanning Electron Microscopy and Correlative Field-flow Fractionation Coupled with Multi-angle Light Scattering

(222) SEM Imaging of Battery Materials by Secondary Electron Energy Filtering

(223) Utilizing Carbon from Microwave Plasma Gasification for Carbide Reinforcement in CoCrFeNiMn High-Entropy Alloy

(224) 4DSTEM in SEM measurements at low electron energy using a pixelated direct detector operated at room temperature

(225) A Versatile MEMS-Based In Situ SEM Holder for Heating, Biasing, andCorrelative Microstructural Characterization

(226) Advanced Hybrid Positioning System of SEM and AFM for 2D MaterialSurface Metrology

(227) Cancelled - Characterization of Carbon Products Produced by Catalytic Pyrolysis of Methane

(229) Detecting Lithium Through Correlative Microscopy in a Scanning Electron Microscope: From Rocks to Batteries

(230) Development of High Pass Electron Detector for Low-energy Backscattered electron Detector in SEM

(231) Development of chopped scan mode with lock-in amplification for electrical analysis of devices

(232) High quality graphene for electron microscopy application

(233) Particle Analysis Method Using Multi-Segmented BED Signals for SEM

(234) Quantitative X-ray Mapping of Ni Superalloys

(236) Synthesis of Carbides from Nanostructured Carbon Waste By-product: A Contribution to Circular Economy

(237) The Effects of Plasma Cleaning on Carbon and Hydrocarbon-contaminated Samples and Quantification of Decontamination in the Scanning Electron Microscope

(238) Vibration Isolation Solutions for S/TEM

(235) Scanning Electron Microscopy Noise Classification Using Machine Learning

A07.P2 - Advances in SEM Instrumentation, Application and Techniques

(369) Advanced Interactive 3D Visualization Tool for Customizable Analyses of Tomography Datasets in Materials Science

(370) Advances in individual detector characterization and key parameters that affect modern EDS performance

(371) EMplified Scan: Integrated Solution for 4D STEM Experiments

(372) Evaluating the Effectiveness of BEX-EDS SEM for Rapid Forensic Sand Analysis

(373) Facilitating Nanomechanical Evaluation of Heterogeneous Microstructures

(374) H5OINA: The latest updates to Oxford Instruments’ open-source file format

(375) Impact of low Vacuum on EDS Analysis- Case Studies with Copper and Molybdenum

(376) Large-Area SEM Image Analysis of Semiconductors Using Deep Learning and Statistical Analysis

(377) New Integrated Software for Soft X-ray Emission Spectrometer in EPMA System

(378) NiTi Composites Reinforced with TiC: Influence of the Chosen Incorporation Strategy

(379) Proposed Automated Sample Preparation and SEM Imaging Workflow for Semiconductor Wafers

(380) Towards Extracting Space Group Information From Experimental EBSD Patterns Using Unsupervised Domain Adaptation

(381) Towards the Implementation of Magnetic Hysteresis into Electron Optical Calculations

(382) ZEAL – A Framework for Zero-Shot Enhanced Analysis and Learning for SEM Image Defect Correction in ICs

A08.P1 - Next Generation Microanalysis Standards For EPMA and SEM-EDS Calibration

(386) Measurements of Secondary Electron Yield for Validation of Scanning Electron Microscopy Models

(387) Secondary Boundary Fluorescence Corrections in Electron Probe Microanalysis

(384) De-MA.ch: a Web-based Database for X-ray and Electron Microanalysts

(385) FIGMAS and MAS Standards Initiatives

(389) Thirty Years After Gene Jarosewich: Exploring the Smithsonian Mineral Collection for New Microanalytical Reference Materials

(390) Trace Element Analyses of Micron-Size Particles and Statistical Determination of Minimum Detection Limits

(383) Systematic Uncertainties in X-ray Microanalytical Measurements

(388) Standardized Chemical Composition Analysis of Graphene Oxide Flakes with SEM/EDS and XPS Works Reliably

(393) Cryo-ADF-STEM Imaging of Crown Ether-Based Polyamide Membrane

(33) Automated Experimental Diffraction Pattern Indexing in pyEMAPS

(35) EBSD Crystallographic and Microstructure Characterization of Laser 3D-Printed Lunar Regolith Simulants for Off-world Construction

(34) Crystal-Orientation-Dependent Image Contrast for Largely Defocused HAADF STEM Imaging

(36) Unraveling the Mechanism of Phase Segregation Phenomena in IGZO Compounds via Precession Electron Diffraction and In-Situ TEM

(37) Using HREBSD to Measure Strain of Second Phase Particles in Aluminum Alloy 2219

A09.P1 - Quantitative Electron Diffraction for Materials Analysis, From Transmission Electron Diffraction to EBSD and ECCI

(129) Measuring Hydrostatic Dilation by High-Resolution Electron Back-Scatter Diffraction

(134) Registration of EBSD and HRDIC scans for the Identification of Active Slip Systems in Ti-6Al-4V

(126) Assessing Radiation Induced Stress Relaxation in Strained Epitaxial Films with HREBSD

(133) Revisiting the Effects of Sample Preparation on EBSD Performance in the Era of Forward Model Indexing

(132) Real Time Diffraction Calculator

(128) Improvement of the Accuracy of Lattice Spacing Measurements using NBD Disks Obtained from Precipitates in Ni-Al-Ti Alloy

(130) Microstructures Causing Structural Instability: Applying Electron Backscatter Diffraction (EBSD) to Samples of Pyrrhotite Oxidation-Induced Concrete Degradation

(127) Femtosecond Laser-Induced Crystallization of Cytosine Monohydrate for Serial Nano Electron Diffraction Analysis

A10.P1 - Advances in Cryogenic Transmission Electron Microscopy and Spectroscopy for Energy and Quantum Materials and Technologies

(391) Atomic-Scale Structural Insights to Optical Anisotropy in Quasi-One-Dimensional Hexagonal Chalcogenides via Electron Ptychography

(396) Low-Dose Atomic Resolution EELS Mapping at Cryogenic Temperature

(397.5) EDS and EELS of Lithium in a 0.5 to 30 keV Electron Microscope

(397) Quantifying the Protective Effect of Cryocooling on Electron Beam-Induced Radiolytic Damage via Impact Crater Expansion

(392) Cross-Platform Ultra-Cold Liquid Helium TEM Sample Holder with High Stability

(395) Guidelines for Imaging and Analysis of Reactive Anode Materials Using Electron Microscope

(394) Electric Field and Mean Inner Potential in BSCCO Below Tc using a liquid Helium holder, Lorentz 4D-STEM and Electron Holography

B01.P1 - 3D Structures: from Macromolecular Assemblies to Whole Cells (3DEM FIG)

(246) Cryo-EM Reconstruction of the phiK601 Jumbo Phage Head

(253) Time-Snapshot Volume Electron Microscopy Analysis of RNA Virus Replication Complex Assembly

(240) 3D Printer Waste Nanoparticles and Their Internalization in Human Colorectal Cells (HCT15), as in Vitro Cell Model of Nanoplastics Absorption

(245) Characterization of a Fundamental, Conserved Structure: The Synaptonemal Complex

(255) Visualizing the Structure of Plant Plasmodesmata with Cryo-ET

(241) Structural Insights into the Mechanisms Behind Avian Structural Coloration

(250) Strategies to Prepare Frozen-Hydrated Duckweed for Cryogenic Electron Tomography of Thylakoid Membranes

(244) 3D Model Generation of Penicillium Spores Using Slice-and-View

(252) Structure of Stx Bacteriophage Phi24B capsid obtained by cryo-EM and local reconstructions

(248) Prototypes of Actin Arrangement in the Focal Adhesion (FA) of Cultured Respiratory Tract Epithelial Cells

(243) Three-Dimensional mapping of decimation of breast cancer cells by therapeutic nanoparticles

(247) Dynamics of sheath subunit of a contractile injection system studied at atomic level during host infection

(251) Structural Characterization of the ASPSCR1-TFE3 Fusion Oncoprotein

(242) The Mtr4 Arch Domain is Required for RNA Movement Between Active Sites in the Saccharomyces cerevisiae TRAMP Complex

(249) Speeding Up OneDep Depositions of Multiple Related 3DEM Entries with pdb_extract

(254) Understanding the structural and functional role of Poxvirus F17 phosphoprotein

B02.P1 - Biological Soft X-ray Tomography

(259) MicroCT Evaluation of Contrast Agent Infiltration and Diffusion in Synthetic Capillary Models

(256) Compact Cell Imaging Device (CoCID) provides insights into the cellular origins of viral infections

(258) Cryo Soft X-ray Tomography -Based Quantification of Phytoplankton Subcellular Structures

(257) Cryo Soft X-ray Tomography and Correlative Imaging of Biological Samples in the Laboratory

B03.P1 - Application of Microscopy Techniques for Research and Diagnosis of Diseases in Humans, Plants and Animals

(406) Copepod Swimming Biomechanics of Labidocera aestiva

(408) DMP-10 as Accelerators in Epoxy Resin Embedding for TEM Sample Preparation

(398) Ultrastructural Localization of Antigens in Tissues with Immunogold Labeling or Enzymatic Metallography and Elemental Analysis Using the BEX SEM Technique

(416) Using cryo-electron tomography to study the molecular mechanisms of neurotropic viral infections using rabies as a model system

(399) Understanding the Polymerization Mechanism of TELSAM

(413) Post-embedding Immunogold in Serial Sections: Volumetric Reconstruction, Segmentation and Quantification of Synapses

(407) Development and Microscopic Characterization of Polysaccharide-Lipid Based DNA Delivery Nanoparticles

(401) Adrenal Zona Fasciculata Nuclei of Gerbils Fed a High-Carbohydrate Diet: A Morphological and Textural Analysis

(414) Simple Method for Pinpointing Specific Osmium-Fixed Cells in Culture for SEM

(411) Faster Automated Pipelines To Utilize Volume Electron Microscopy In Biomedical Testing.

(410) Enhanced endosome formation of lipid-modified DNA via cell membranes

(400) A High Content Imaging and Machine Learning approach to identify the anti-cancer effect of novel small molecules on cancer patient-derived organoids

(403) Application of Cryo-Electron Microscopy for Visualization of the Membrane-Associated Vesicles

(402) An Assessment of the Polymorphism of Small Extracellular Vesicles Isolated from Gastric Juice by Cryo-Electron Microscopy

(409) Effect of the Met23Leu Mutation in the KCNE2 Auxiliary Subunit on the KCNH2 channel protein surface expression

(404) Bacteriophage Infectivity against Pseudomonas aeruginosa Biofilm under Different pH Conditions

(412) Multimodal Microscopy to Study Poplar Stem Structures and Cell Walls

(405) Cellular Fragility and Neural Sickness of OSRNs within the Olfactory Neuroepithelium of Fish

(415) Using Convolutional Neural Networks to Identify COVID-19 Infection from Lymphocyte Morphology in Digital Optical Micrographs

B05.P1 - Development, Challenges and Biomedical Applications of Tissue Clearing, Expansion Microscopy and Volumetric Imaging

(135) Advanced Microscopy Techniques for Imaging New Alternative Methods

(138) Overcoming the Challenges of Integrating Diverse EM Tools into a Unified Research Framework

(136) Advancing Biological Electron Microscopy: Versatile 3D-Printed Solutions for Automated Sample Processing

(137) ExPOSE: a Revealing Look at Plant Cells Through Expansion Microscopy

B06.P1 - Microscopy in Cell and Molecular Biology across the Americas (CIASEM)

(38) Assessment of the genotoxic effects of Nanomaterials on plant tissues, using “Allium cepa” as the experimental model organism

(39) Electrochemical synthesis and characterization of silver nanoparticles

(40) Preparation and Imaging of Monhysterid Nematodes from the Great Salt Lake with a Scanning Electron Microscope

(41) Characterization morphology of Palo Azul (Eysenhardtia polystachya) by Scanning Electron Microscopy

(42) Characterization of the morphology of starch extracted from agricultural residue, specifically mango seed

(43) Effect of Biotic-Origin Carbon Nanotubes Biotransformed by Trichoderma sp. on the Development of Avena Sativa

(44) Morphology of Non-Commercial Chitosan Films with and without Propolis SEM Analysis

(45) Multiwalled Carbon Nanotubes in Synergy with Glycine-Betaine Improve the Germination of Zea mays and Mitigate the Negative Effects Caused by Water Stress

(46) Optical properties of hydrothermally synthesized Ti3C2 MXene quantum dots and their application in biosensor

(47) The production of nanocellulose from organic waste and its assessment through spectroscopic and microscopic methods.

B07.P1 - Cryo-electron Tomography: Progress and Potential

(260) Characterization of Respiratory Syncytial Virus Matrix Mutants with Cryo-Electron Tomography and Sub-Tomogram Averaging

(261) Simplified Montage Cryo-Electron Tomography

(262) Visualization of Full-length Insulin Receptor by Cryo-electron Tomography

(263) Advancing Integrated Cryo-Fluorescence Imaging for Fast, Reliable and High Throughput Cryo-ET Lamella Production

(264) Are We Overestimating Cryo-ET? Evaluating the Role of 2D Cryo-EM for In Situ Studies

(265) Cryo-electron microscopy of vitreous sections (CEMOVIS) application for model organism

(266) Cryo-ET visualization of Kirrel3 and IgSF8 junctions in synapse initiation

(267) Cryogenic Electron Tomography of Synthetic Layered Magnetic Organics

(269) The Essential Role of ER-Localized TRIM5α in Defending Against Tick-Borne Orthoflaviviruses

(270) Thermo Fisher Scientific Tomo Software: Integrated Multigrid Data Acquisition and Live Reconstruction

(271) Understanding host-phage interactions with integrative cryo-electron microscopy and tomography, mass spectrometry and whole cell kinetic modeling

B08.P1 - Advances in Cryo-EM technology

Cancelled - Developing a Cryo-SEM Workflow for Structural Analysis of Human Microglia in Combination with an Unroofing Method

(143) Accelerating Outreach and Training at the Pacific Northwest CryoEM Center Through Advanced Sample Preparation with the Vitrojet

(141) Quantum C100, a Wafer Scale CMOS Detector Optimised for 100 keV Cryo Electron Microscopy

(139) Feasibility of Using Desktop SEM Equipped With STEM for Low-Cost Efficient Screening of Negatively Stained Samples in the Cryo-EM Workflow

(149) Employing Xe Plasma FIB for Fast and Precise Sample Preparation

(144) Back to the Future: Modern, Parametric Manual Plunge-Freezer for Cryo-EM

(140) Low energy ion thinning of frozen biological specimens for electron cryomicroscopy

(142) Storage of plasma functionalised surfaces on cryoEM specimen supports for years

(150) Empowering Cryo-EM research across the southeastern U.S. through SECM4

(153) New developments for single particle cryo-EM data processing in CryoSPARC

(146) Data Compression in Transmission Electron Microscopy

(148) Efficient accessibility and opportunities for antibody structural study using Cryo-EM and Protein engineering

(151) Fully automated screening workflow with Smart EPU

(145) Critical Assessment of a Novel Vitrification Platform with Enhanced Robustness Using a Grid Quality Framework with AI-based Image Scoring

(152) Innovative Solutions for Higher Efficiency and Throughput in Cryo-Electron Microscopy and Tomography

(147) Development of several workflows for the cryo-FIB/TEM

C01.P1 - Microscopy and Microanalysis of Interfaces and/or Interactions Among Organic and Inorganic Matter

(53) Interlaminar Analysis of Aluminum Matrix Reinforced with SiC Particles by Microscopy Techniques

(51) In-situ Characterization of Dust Nodules in Ice Cores from the Tibetan Plateau

(54) Investigating the stability of Zeolitic imidazole frameworks (ZIFs) metal-organic framework in operational environments: potential candidate of host-guest chemistry

(55) Nanostructured UiO-66 Gel for Efficient PFAS Remediation: Electron Microscopy Insights

(50) First Report of Fossil Insect Mandibles, Cadavers and Larval Molt Casts fromDecalcified Bones of Cretaceous Dinosaurs (Edmontosaurus, Triceratops andNanotyrannus): scavengers feeding on organic sources within inorganic bones

(52) Interface Bone-Implant with an Osteoinductive Treatment

(56) The Effect of Zn Addition on Bioabsorbable Mg Alloys

(48) Environmental-like microplastic & nanoplastic (eMNPs) visualization and characterization: Challenges and future outlooks

(49) Strontium Sulfate Crystals Using Multimodal Microscopy and Spectroscopy

C02.P1 - Lens On Diversity: Empowering Engagement in the Microscopy Sciences

(57) A study of high-temperature polyimide fiber synthesis and analysis

(58) Diffraction Study of Epitaxial ZnO with Au Catalyst on Sapphire Substrate

C03.P1 - Microscopy and Microanalysis in Industry

(154) Characterization Study of a Level IV Ballistic Plate

(155) Effect of WC Addition on the hardness of Ti-Zr Alloy

(156) Focus Stacking for 3D Morphology Analysis in Optical Microscopy

(157) A Study on Compressive Properties of Carbon Fiber-Reinforced Nylon (ePA-Cf)

(158) Best Practices to Clean Ultrathin Carbon and Graphene Film Grids for TEM Analysis

(159) Characterization of Diamond-like Carbon Coatings under Extreme Service Conditions

(160) Comparison and Evaluation of the Corrosion Behavior of Two Innovative B4 C Samples Doped with 0.5% and 3% FeNiCoCrMo High-Entropy Alloy

(161) Comparison of Corrosion Behavior of 316 and Duplex Stainless Steels in 7% NaCl Solution

(162) Dissolution and Physical Characterization of Oral Nicotine Products

(163) Evaluating Acid Penetration Effects on Geopolymer integrity using Microscopy and Microanalysis

(164) Image Texture and Confocal Study of Starch-Based Extrudates Reinforced with Vegetal and Animal Protein as Snack Alternatives

(165) Impact of Cooling Media on the Microstructure of AA6061 After High-Temperature Solution Treatment

(166) Microstructure, Microhardness and Corrosion Behavior of a High Entropy Heat Treated Alloy

(167) Nanoscale Compositional Analysis of NiSix with Electron Energy Loss Spectroscopy (EELS)

(168) New Possibilities in the Customization of Materials to Improve their Performance and Functionality: Hexagonal Laser Texturing

(169) Utilising Microscopy and Microanalysis Techniques to Investigate Debris on Filters

(170) UV-Light Coupling as a Method for Enhancing Optical Microscopy Imaging of Fluorescent Materials

C05.P1 - The Relevance and Advancement of Microscopy across the Americas (CIASEM)

(272) Effect of power on the characteristics of clads and coating of 316L steel deposited by Laser Cladding on vertical walls of D2 steel.

(273) Effect of Synthesis Parameters for Synthesizing Mesoporous ZnO Microparticles

(274) Elemental Analysis of Particles inhalables by SEM-EDS

(275) Enhancing Al-Cu Alloys Produced by High-Energy Milling and Sintered by High Frequency Induction Heating for Microstructure Control

(276) Microscopy and Microanalysis in Modern Engineering Materials and Additive Manufacturing Education

(277) Study of Two Ternary Al-Mg-Zn Systems Used as Electrical Conductors

(278) Synthesis of Nanoparticles of Fe50Zn by Reactive Milling and Ultrasound Washing

(279) Comparative Study of Tungsten Carbide Bonded with Equiatomic Cantor Alloy CoCrFeMnNi Sintered Conventionally and Spark Plasma.

(280) Dispersion and Sintering Behavior of Hybrid Al7075 Composites Reinforced with TiC and TaC Processed by Mechanical Alloying and High-Frequency Induction Sintering

(281) Effect of laser power welding on the characteristics of P20 stainless steel clads for mold tools repair

(282) Effect of Li addition on hardness and microstructure in an A356 Al alloy

(283) Effect of process control agent on the mechanosynthesis of the non-equiatomic high entropy Alloy Al12Mo10Fe35Mn23Ni20

(284) Effect of Shaker and Planetary Ball Milling on Graphite Structure: A Comparative Study

(285) Effect of Sintering Parameters on the Microstructural Properties of Nanostructured Inconel 718.

(286) Impact of Precipitation Hardening and Dispersion of Tungsten Carbide Particles on the Mechanical Properties of Al-Cu-Mg/WC Composite Subjected to T6 Treatment

(287) Study microstructural of CoCrFeMnNi high-entropy alloys modified with V and Mo

(288) Sustainable Improvement of 7075 Aluminum Alloy with Modified Graphene Oxide

(289) Thermo-X-rays diffraction analysis of carbides crystallization in CrMnFeCoNi, CrMnFeCoNiV0.5 and CrMnFeCoNiMo0.5 High Entropy alloys

C05.P2 - The Relevance and Advancement of Microscopy across the Americas (CIASEM)

(418) Air-Fried Totopos: A Novel Snack Evaluated by Microscopy Techniques for Optimal Food Qualitie

(419) Bismuth Nanowires Prepared by Pulsed Laser Deposition and Possible Nucleation and Growth Mechanism

(420) Carbon Nanotubes with Springs Morphologies Produced from Iron Catalyst

(421) Confocal evaluation of carbon quantum dots obtained by microwave synthesis from coffee and garlic residues

(422) Electron Microscopy of the g-C₃N₄/Ni Heterojunction for Photoreduction of Heavy Metals and Hydrogen production

(423) Elemental Analysis of Fine Particles by SEM-EDS

(424) Exploring Momentum Transfer in Electron Microscopy: Size and Material Effects on Nanoparticle Resonances

(425) Mechanosynthesis of High Entropy Ceramics of MgAlTiCrNi system

(426) Metastable MnGe2 Thin Films Grown on MnO(001) Substrates by Magnetron-Sputtering Technique

(427) Morphological Study of ZnO Particles Crystalline Faces for Photocatalytic Degradation of Rhodamine B

(428) Morphology and Distribution of Agglomerates in Enzyme-Stabilized Soil: A Scanning Electron Microscopy Analysis

(429) Porosity induction in a nanoparticle assisted by the time exposition to energy of electron beam in TEM

(430) Rapid Detection Of Chemical Constituents of Capsicum Chinense< (Chile Habanero) and Capsicum Pubescens (Chile Manzano) Extracts Obtained From Maceration and Ultrasonic Bath Extraction Methods.

(431) Synthesis and Characterization of Copper Nanoparticles through Chemical and Electrochemical Methods

(432) Synthesis of Mesoporous Samarium Oxide by Using CTAB

(433) Synthesis of Nanoparticles of FeZn by Reactive Milling and Washing by means of Evaporated Alcohol

(434) The Nanofabbed Atlas of Fourier Transforms: Interactive Diffraction Education

(435) Tuning Wettability of Manganese Oxide Nanostructures by Controlled Morphology Modification

C06.P1 - Advancements in Generative Artificial Intelligence and Automation for Electron Microscopy

(290) A Flexible System for Fully Autonomous STEM Imaging

(291) Advancements in TEM acquisition and analysis automation for large area cell and tissue imaging and nanoparticle characterization

(292) AI Auto Tilt: Central beam and zone axis detection, a step towards autonomous atomic resolution STEM

(293) An autonomous, Large Language Model driven X-ray Microscope with contextual understanding of domain specific experimental workflows

(294) An autonomous, Large Language Model driven X-ray Microscope with contextual understanding of domain specific experimental workflows

(295) Artificial intelligence powered morphology characterization for advanced material design and failure analysis

(296) Automation of Laser Plasma Focused Ion Beam Microscopy for Next-Generation Energy Materials

(297) Deep Learning for Noise Reduction in High-Resolution In-Situ TEM

(298) Describing Point Defect Topology in 2D Energy Materials through Computer Vision

(299) Enhancing Automated Defect Detection in High-Throughput SEM: Balancing Throughput, Resolution, and Accuracy in Large-Area Analysis

(301) Cancelled - Integrating Expert Knowledge in Autonomous Microscopy to Accelerate Discovery

(302) The Art and Science of Microscopy: Translating Operator Workflows into Automated Processes for Accelerated Discovery

C06.P2 - Advancements in Generative Artificial Intelligence and Automation for Electron Microscopy

(436) A Next-Generation Defect Taxonomy for AI-Enhanced SEM-Based Semiconductor Inspection

(437) AI-Automated Morphological Feature Analysis of Bacterial Ultrastructures for CryoEM

(438) Cancelled - An Asynchronous Object Detection Framework for TEM Data Analytics

(439) CryoFAST™: AI-Automated Sample Screening and Data Collection in SerialEM and Smart EPU

(440) Developing a Deep Learning Model for the Detection of Fibres in the Scanning Electron Microscope

(441) LLM-Assisted Causal Discovery: Mapping Hidden Patterns in Crystalline Solids

(442) Machine Learning Model for Atomic-Level Dynamic Analysis of in situ Environmental Transmission Electron Microscopy Data on Cu2O embedded in Cu

(443) Nodeology: Creating Graph-based Agentic Workflows for AI-Assisted Electron Microscopy

(444) Scanning transmission electron microscopy-based grain mapping via non-negative matrix factorization processing

(445) Stable generalization under small shifts to imaging conditions for neural network analysis of high-resolution transmission electron microscopy

(446) The Challenges of Strain Analysis for Electron Tomography

(447) Towards Implementing Cloud-based Workflows for Near Real-Time Processing of Large 4D STEM Experimental Datasets

(448) Towards Transparent and Knowledge-Distilled Deep Learning Networks for Protein Secondary Structure Detection from Cryo-EM Maps

C07.P1 - Towards Functional Imaging of Materials: Advances and Insights from Phase Contrast Techniques

(59) Advanced Characterization of Multilayer Films Using Combined SEM-EDS-Raman Approach

(60) Differential Phase Contrast using Precession Illumination at pn Junction in GaAs

(62) Field-free imaging and analysis for magnetic materials

(64) Measuring Dislocation Line Charge in GaN using Scanning Precession Electron Diffraction

(65) Determination of Fresnel integrals for X-ray phase contrast imaging with the fast Fourier transform

(66) Electron Microscopy of 2D Layered Double Hydroxides for Antigen Loading and Realease

(67) Measuring Dynamic Diffraction for quantitative HREM

(63) Measurement of Self-coherence in the Transmission Electron Microscope for Detecting Time-dependent Coherent-inelastic Electron Scattering in the Heisenberg Limit

(68) Hydrophilization and activation of carbon coated TEM grids using a light spectrum device

P01.P1 - Advanced Characterization of Nuclear Fuels and Materials

(72) In-Situ Investigations of Tensile and Fracture Behavior of Lattice Structures for Advanced Reactor Applications

(75) Minimizing waste from electropolishing radioactive samples for EBSD data collection.

(70) Chemical Interaction of Palladium in Uranium Oxycarbide Nuclear Fuel Kernel

(71) High-MAN backgrounds: EPMA of trace-element doped Uranium metals

(75.5) Employing three-dimensional focused-ion beam tomography for comprehensive mesoscale characterization of surface degradation of nuclear materials

(74) Investigating the EELS Signal Produced from Einsteinium-254

(76.5) Defect interactions ε-martensite, stacking fault, and twin interfaces in hydrogen precharged austenitic stainless steel

(73) In-situ Ion Irradiation of a Spent UO2 Fuel: Evolution of Fission Products and Nanograins with Radiation Dose

(76) Multiscale Characterization of Dislocation Cell Structures in LPBF Processed 316L Stainless Steels

P02.P1 - Electron Microscopy for Ferroic Materials: From Atomic-scale Imaging to in-situ Control

(308) Cancelled - Exploring the Structure and Defects in MnCuSiTe, a Multiferroic system using Electron Microscopy

(307) Electron Microscopy and Structural Studies of Iron Oxides Nanoparticles produced by using Sonochemical Synthesis

(315) Stop Sweeping it Under the Rug! – Revealing the Hidden Phases and Elements of 2D Material Interfaces with Atom Probe Tomography

(310) In-situ Atomic-Resolution Observations of Formation of Amorphous Iron during Reduction of Iron Oxides in Hydrogen

(316) Structural Studies of Single-Atom Yb3 Defects in CrI3 2D Ferromagnets Using Scanning Transmission Electron Microscopy

(312) Nanoscale investigation of magnetic and optical properties of strain-engineered 2D antiferromagnetic (VNi)PS3

(313) Plasma Treatment Strategies for Tailoring the Thickness and Surface Chemistry of VSe₂ and V₂O₅ for Magnetic Material Design

(306) Electrode Interface Effects in Hafnium Zirconium Oxide Ferroelectrics

(309) Cancelled - Ferroelectric STO? Tilt and Astigmatism May Lead to Misleading Displacements at Atomic Resolution

(311) Live User-Guided Low Dose Scanning Transmission Electron Microscopy Imaging

(318) Where is my Ion? Correlative STEM and APT Analysis of Low-Dose Magnetic Ion Implantation in Ferroelectric Materials

(305) STEM Characterization of Substrate/Graphene Epitaxial Influences on GdAuGe Orientations and Interfaces

(303) Annealing Optimization for HZO Thin Films with In-Situ STEM EBIC Characterization

(317) Study of Ferroelectric Phases in HfZrOx Thin Films with varying La Content using Precession Electron Diffraction & In-Situ Heating- Biasing Techniques

(304) Polarization-Controlled Structural Modulation in the Single Atomic Layer at the PbZr0.2Ti0.8O3 LaNiO3 Interface

(314) Probing the structure of a novel chalcogenide multiferroic

P03.P1 - Characterization of Collective Excitations by Electron Microscopy with High Spatial, Energy, Momentum, and Temporal Resolutions

(86) Probing Nanoscale Vibrational Properties In Monoclinic Beta Gallium Oxide Via Vibrational EELS

(89) Stability and Viability of Off-Axis Photoemission Geometries in 4D Ultrafast Electron Microscopy

(83) Mapping Phonons Induced by Polarization using Differential Momentum Resolved Scanning Transmission Electron Microscopy-Electron Energy Loss Spectroscopy

(87) Probing Spatial and Temporal Dynamics of High-Q Dielectric Metasurfaces with Ultrafast Electron Microscopy

(81) Detecting Magnon-Phonon Coupling with STEM-EELS

(80) Applications of a novel CEOS energy filtering and imaging device for the investigation of electronic structures of delafossite CuFeO2 single crystals growth by optical floating zone method

(85) Probing Chiral Atomic and Nanoscale Materials with Structured Electrons — Emerging Possibilitie

(88) Cancelled - Probing Ultra-Confined Terahertz Surface Phonon Polaritons in Few-Unit-Cell Freestanding SrTiO3 Membranes by STEM-EELS

(79) Understanding the momentum-resolved phonon EELS signal through multi-modal simulation

(78) Observation of Strong Phonon Anisotropy Across Dislocation Region in Oxide Freestanding Film

(84) Nanoscale Near Field Imaging of Surface Plasmons by Ultrafast Electron Microscopy

(82) Exploring Local Phonon Behavior on Oxide Nanoparticle Surfaces

(90) Visualizations of Polarization-Induced Atomic Vibrational Anisotropies Using Momentum Selective Vibrational Spectroscopy

P04.P1 - Energy Materials: Transport Pathways, Interfaces, & Durability for Performance

(92) Development of A Novel Fiber-Type Supercapacitor by Hydrothermal Recrystallize Method

(93) Exploring Intergrowth Formation in Superconductor YBaCuO_7-δ Thin Films

(91) Confinement of Ti3C2Tx MXene Nanosheets within a Polymer Matrix via In-situ Polymerization and Deposition on Carbon Cloth for Supercapacitors

P04.P2 - Energy Materials: Transport Pathways, Interfaces, & Durability for Performance

(96) Elucidate Phonon Dynamic of Grain Boundaries in Perovskite Solid-State Electrolytes by Electron Microscopy

(94) EELS mapping to reveal the spatial distribution of cation valance and oxygen deficiency at the cation-disordered oxide cathode

(97) Real-Time In-Situ TEM Insights into the Electrochemical Behavior of Hybrid Polymer Network Cathodes in Lithium-Sulfur Batteries

(171) Ferrite-Dichalcogenide Nanocomposites for Energy Storage Applications

(98) Surface Structural Evolution of Air-Exposed Carbon-Coated LiFePO₄ from Supercritical Hydrothermal Synthesis

(95) Electrochemically induced intraparticle separated states in LFP probed with STEM-EELS

P04.P4 - Energy Materials: Transport Pathways, Interfaces, & Durability for Performance

(172) Investigation of α-V₂O₅ as a Cathode Material for Magnesium Ion Batteries Using Atomic Resolved Scanning Transmission Electron Microscopy

(178) Development of a crystallographic model of the interface from HRTEM images and the effect the CL in the electron density distribution of the Perovskite Solar cells

(173) Liquid Metal Coatings on Lithium Metal Anodes Protect Against Capacity Fade: A Cryo Electron Microscopy Study

(179) Incorporation of Ru in BaTiO3 for Improved Electrocatalytic Activity

(174) Microstructure Study for the Effect of Ionotropic Gelation in COOH-Based Binders in Multivalent Ion Batteries

(177) Characterization of CdTe Back-Contacts with Thick Alumina Reflectors

(175) Quantitative Analyses of Mesopores in Carbon Electrode Materials via Low-Voltage SEM

(181) Observing atomic-scale 3D structural evolution of nanocatalysts

(176) Cancelled - Analytical STEM study of Bi₂O₃ catalyst for selective chemical looping combustion

(180) Cancelled - Low Dosage In-situ and Ex-situ S/TEM Characterization of Hybrid Organic-Inorganic MAPbI3

P04.P5 - Energy Materials: Transport Pathways, Interfaces, & Durability for Performance

(183) Investigating H₂ Production Kinetics of Nano-Si Powders in Water via Liquid-Phase TEM

(185) Real-Time environmental TEM Investigation of Perovskite Electrode Degradation in Solid Oxide Cells

(182) How Interface Evolution at the Nanoscale Dictates Protonic Ceramic Cell Behavior

(184) Morphological Analysis and Chemical Composition of a SOFC Stack by Tape Casting and Screen Printing

(186) Revealing the Role of Individual Metal-Support Interactions in Hydrogen Production for Heterogeneous Photocatalysts via 4DSTEM Techniques

P05.P1 - Advances in Imaging and Spectroscopy Beyond Ambient Conditions

(99) Surface Atomic Defects and Self-Regulated CO Adsorption on Cu(111): Insights from High-Resolution Scanning Probe Microscopy

(100) Comparison of ultramicrotomy and electropolishing for TEM observations of Al-Mg-Zn thin foils

(101) Determining Core-Shell Colloidal Quantum Dot Structures from Various Synthesis Methods Using Cryo-STEM

(102) Identification of unique Pd-based compounds in twisted MoTe2 nanojunctions

(103) Phonon Modes of High-Tc YBa₂Cu₃O_7-δ Films: Effects of Doping and Isotope Substitution

(104) STEM defocus influenced misinterpretations in imaging exciton confinement

P06.P1 - Multimodal Data Acquisition and Analysis of Materials Under Real-World Conditions Using Advanced Electron Microscopy

(320) Investigation of Creep Deformation in Copper-Chromium-Zirconium Alloy, a Candidate Heat Sink Material in Fusion Devices using Multiscale Experimental Methods

(322) TemCompanion: An Open-Source Multi-Platform GUI Program for TEM Image Processing and Analysis

(319) In-Situ atomic-scale visualization of dual oxidation mechanisms in NiCr alloys

(321) Natural Liquid Cells: Nanoscale Fluid Inclusions in Asteroid Samples

P06.P2 - Multimodal Data Acquisition and Analysis of Materials Under Real-World Conditions Using Advanced Electron Microscopy

(324) Dual-modal depth sensitive real space magnetic imaging of 3D skyrmions in multilayer thin films

(323) Crystallographic Analysis of Trapiche Ruby using Low-Vacuum Field Emission Scanning Electron Microscopy, Electron Backscatter Diffraction Pattern, Raman Spectroscopy, and Field Emission Electron Probe Microscopy

(325) StemOrchestrator: Enabling Real-time High-Throughput particle characterization in STEM

P07.P1 - High-Resolution Microscopy and Microanalysis of Materials Subjected to Extreme Environments

(334) Long-term thermal stability and evolution of Ni-rich laths in Cr-alloys

(330) Atomic-Scale Investigation of Defect Formation and Phase Transformation in Ir-Deposited Ga₂O₃ Schottky Diodes

(332) How Silane Surface Modification Affects the Structure of PLA/Wax/ZnO Composites During Hydrolytic Degradation.

(327) In-situ Observation of Secondary Grain Boundary Dislocation and Grain Boundary Disconnection Interaction

(328) Wire Arc Additive Manufacturing of Copper Nickel and Nickel Aluminum Bronze: A Microscopy Driven Microstructure-Property Study

(336) Cancelled - Role of Heat Treatment on Microstructural and Mechanical Properties of Copper–Nickel Alloys Processed by Wire Arc Additive Manufacturing

(329) Analytical and Experimental Study of the Degradation Factor by Accelerated Aging in AISI 4140 Steels in the Food Industry

(333) In Situ TEM Observation of Crack Deflection and Arrest in Graphene-Based Nanocomposite

(331) Fever State Simulation to Study the Behavior of Novel Ti-Mn Alloys for Medical Devices

(326) Angled Plan View Sample Preparation of Diamond Thin Films for Multiscale Analysis

P08.P1 - Advanced Imaging, Diffraction, and Spectroscopy of Structurally or Chemically Disordered Materials

(187) 4D-STEM Investigation of Medium-Range Ordering in Bulk Metallic Glasses: Structural Evolution in Shear Bands and Annealing-Induced Relaxation

(188) Fluctuation Electron Microscopy with 4D STEM Reveals Structural Heterogeneity in Amorphous Functional Nanostructures

(189) Atomic-Scale Investigation of Cation Intercalation in 1D Lepidocrocite Titanate Nanofilaments via STEM-EELS

(190) Electron Beam-Induced Formation of MWCNT-Ag Nanostructures in a Transmission Electron Microscope

(191) Mechanosynthesis of the high entropy oxide Al2TiV2Y2ZrO15 and its physicochemical characterization

(192) Microstructural Characterization of Electrochemically Pulsed Disordered Rocksalt Cathodes

(193) Nanoscale Insights into Charge Trap Layer Engineering in Flash Memory Devices

(194) Restructuring of Defective PtSe2 Nanoparticles into Stable Catalyst for Oxygen Reduction Reaction

(195) Visualization and Characterization of Bulk Oxygen Nanobubbles using Fluid Peak Force Quantitative Nano-Mechanical Atomic Force Microscopy

P08.P2 - Advanced Imaging, Diffraction, and Spectroscopy of Structurally or Chemically Disordered Materials

(196) Addressing Oxide Shell Formation in Harmonic Zinc Alloys for Improved Mechanical Integrity

(197) Advancing Statistical ALCHEMI: Efficient Dopant Distribution Analysis at nm-scale from Sparse Spectrum Observations

(198) Directed Energy Deposition of NiTi Shape Memory Alloys: Comparison of Ni-Ti Powder Mixture vs. Pre-alloyed Powder Feedstock

(199) Dual-phase coexisting structure of crystalline nickel shell combined with the amorphous copper Prussian blue analogue (CuHCF) core.

(200) Effects of Ligands on Synthesized Process of Perovskite Crystals by Reprecipitation Method

(201) Optimization of Yttrium Incorporation in 316L Steel and Pure Iron via High­-Energy Milling

(202) The Power of Open-Hardware Solutions for Improving Transmission Electron Microscopy Experiments

(203) Three-dimensional Analysis of the Lattice Bending Strain by Iterative Phase Retrieval of Electron Rocking Curves

(204) Unraveling the Microstructures of Additively Manufactured Multi-Component Alloys Through Multi-Scale Characterization: Insights from SEM and Advanced STEM Techniques

P08.P3

(338) Cancelled - Electronic Structure of Ruddlesden-Popper Faults in Perovskite Oxide Thin Films

(339) Hafnium modified SiO2: properties

(340) Influence of Mechanical Loading at Low-Temperature on the Functional Fatigue of Shape Memory Alloys

(341) In-Situ Dynamics of Moiré Superlattice Epitaxy as a Platform for Site-Selective Adhesion and Growth

(342) Machine-Learning Molecular Dynamics for Insights into Vibrational Electron Energy Loss Spectroscopy

(343) Melting of 2D Charge Crystals Quantified with In Situ TEM

(344) Mineralogical comparison between crocidolite and amosite asbestos using atomic resolution scanning transmission electron microscopy

(345) Optimal 3D Chemical Recovery with Multimodal Electron Tomography

(346) Use of the HFCVD-CSVT Technique to Obtain Nanostructured Tungsten Oxide with Bundles-, Flowers-, Nanospheres- and Nanowires-like Morphologies

P09.P1 - Unconventional Electron Probes

(205) Development of Ultrafast Four-dimensional Precession Electron Diffraction

(206) Precise Measurements of Spatial Coherence of Electron Beams and Axial Brightness of Electron Emitters

(207) Cancelled - Probing Low-Energy Reciprocal-Space Excitations in 2D Materials from Atomic Crystals to Nanophotonic Arrays Using Momentum- and Pseudoangular Momentum-Resolved EELS

(208) Progress in Squeezed States of Electron Illumination

(209) Technological Advancements in the Tunability and Applications of Electrically Driven Ultrafast Electron Microscopy

(210) Phase Structured Electron Beams to Probe Chiral Plasmons

P10.P1 - Innovative in-situ Imaging Techniques for Material Characterization, Synthesis, and Processing

(211) In Situ Laser Ablation for the Supply of Atomized Material for E-beam Fabrication

(212) In Situ TEM with Simultaneous Nanocalorimetry of the Crystallization of Phase Change Materials

(213) Modulating Metal Support Interactions for Durable and Selective CO₂ Hydrogenation Reaction: An Operando Transmission Electron Microscopy Study

(214) Multi-modal In-situ High-pressure Gas Heating Electron Microscopy and Spectroscopy of Heterogenous Catalysts

(215) Observation of Switching Anion Filament In Phase-Separated 2D Halide Memristor

(216) Structural Evolution of Au-Ag Core-Shell Nanoparticles Under Electron Beam Exposure: Insights into Atomic Migration and Alloy Formation

(217) Time-Resolved Spectral Micro-CT for Investigating dynamic processes in pore structures

(218) Using Water Droplet Reactor Strategy to Directly Observe Disassembly Process of Pt Micelle in Liquid Phase Transmission Electron Microscopy

P10.P2 - Innovative in-situ Imaging Techniques for Material Characterization, Synthesis, and Processing

(347) Direct Imaging of Field-induced Modulation of Two-dimensional Electron Gas at LaAlO3/SrTiO3 Interface by Polar Distortion of LaAlO3

(348) Magnesium-Assisted Combustion Synthesis of TiC Nanoparticles

(349) Trapping Nanoparticles in Nanofluidic Traps Using a Monolithic Liquid Phase-TEM Chip

(350) Atomic diffusion promoted in the MoO₃-Au heterostructure by the electron beam in the transmission electron microscope

(351) Complexities in Electron Beam Induced Current (EBIC) Image Formation in Low-Impedance Specimens

(352) Moving with the Times: Predictive Drift Correction of Multi-frame STEM

(449) Cathodoluminescence from Mn4-Doped Fluorides

(450) Determination of Structure-Property Relationships for Polysaccharide Hydrogels via Correlated Electron Microscopy and Ultra-Small-Angle Neutron Scattering

(451) In-Situ Cryo 4D-STEM of 1T-TaS₂ for Chiral CDW Domain Characterization

(452) In-Situ Investigation of Electron Beam-Induced Gas-Phase Polymerization Using Closed-Cell Transmission Electron Microscopy

(453) Optical Holder for in situ Pulsed Laser Deposition

(454) Rare Earth Ion-Doped Light-Emitting Nanoparticles as Negative Thermal Expansion Materials

(455) Visibility of Nanoparticles in Liquid-Phase SEM via Monte Carlo Simulations

(353) Uncovering the Formation Mechanism of Hexagonal Porous MXene